Torque Transducers
We provide the measurement signals needed to control the vibratory input and to analyze the product’s reaction to such testing. There are various pound/force vibration shakers for structural testing. Regardless of the apparatus, the goal is always to ensure that the product under test can adequately perform, and reliably survive, in the environment in which it will be deployed, or to which it will be exposed during transport.
Tork Disc
We provide the measurement signals needed to control the vibratory input and to analyze the product’s reaction to such testing. There are various pound/force vibration shakers for structural testing. Regardless of the apparatus, the goal is always to ensure that the product under test can adequately perform, and reliably survive, in the environment in which it will be deployed, or to which it will be exposed during transport.
Rotatory Transformer
Triaxial accelerometers provide simultaneous measurements in three orthogonal directions, for analysis of all of the vibrations being experienced by a structure. Each unit incorporates three separate sensing elements that are oriented at right angles with respect to each other
Reaction Torque
Structured with highly sensitive piezoceramic sensing elements, miniature Ceramic Shear ICP® Accelerometers have an excellent signal-to-noise ratio, high measurement resolution, and are ideal for conducting low-level vibration measurements. Due to their inherent higher sensitivity, a ceramic ICP® accelerometer can be assembled with a smaller mass than comparable quartz units, resulting in a sensor that is lighter in weight, has a higher frequency response, and has a lower noise floor.
Rotatory Slip Ring
HALT, or Highly Accelerated Life Testing, exposes prototype and beta version products to severe thermal and vibration stress cycles in an effort to determine their mean time to failure and precipitate and detect design and manufacturing problems.
HASS, or Highly Accelerated Stress Screening, is a product specific process, which exposes production run items to thermal and vibration stress cycles in an effort to precipitate and detect latent manufacturing defects and component problems.