The Laser Primary Accelerometer Calibration Workstation Model 9155D-575 offers primary calibration of vibration sensors with extremely low measurement uncertainty, exceeding performance requirements specified in ISO 16063-11 from 0.1 Hz to 20kHz. The system seamlessly integrates both primary calibrations using laser interferometer and secondary calibrations using the system's reference standard accelerometer as specified in ISO 16063-21.When using the 9155D-575 Laser Primary System, the 9155 Accelerometer Calibration Workstation and Air Bearing Shaker (9155D-831) are required options.
The Accelerometer Calibration Workstation Model 9155 offers accurate back-to-back comparison calibrations of ICP® (IEPE) and charge mode piezoelectric accelerometers in accordance with ISO 16063-21. The 9155 system also calibrates piezoresistive (MEMS), capacitive, and velocity sensors via available options. Benefits of the Model 9155 form in two areas: conformance to existing standards and automation of the calibration task.
Low frequency Portable calibrator
The Model 9155D-779 Low Frequency Long Stroke Calibration Shaker, option to the 9155 Accelerometer Calibration Workstation, represents a new level of performance in calibration grade long stroke shakers with SmartStroke™ technology. Option 9155D-779 continues the award winning PCB Group tradition of providing superior performance characteristics and ease of use while offering exceptional value and simplicity. Optical encoder and linear motor technology allow automated armature position, eliminating the suspension adjustments that plague users of traditional long stroke shakers.
Shock Sensor Calibration
The PneuShock™, Shock Accelerometer Calibration Workstation, Model K9525C measures sensor sensitivity at high acceleration levels up to 10,000g in accordance with ISO 16063-22. PneuShock™, a state-of-the-art shock exciter, uses a pneumatically operated projectile to strike an anvil and excite the sensor under test.
Low Pressure Calibration System
The Model K9903C Pressure Calibration Workstation performs low pressure calibrations on a wide range of dynamic pressure sensors. The Model K9903C is an integrated system that includes the calibration fixture, data acquisition hardware, Windows PC, and software to automate test setup, data acquisition, data archiving, and report generation. The K9903C provides low (up to 150 psi [1 MPa]) transient pressure pulses to the sensor under test, in accordance with ANSI B88.1. The K9903C calculates sensor sensitivity, linearity, and discharge time constant.
Medium Pressure Calibration System
The Model K9907C Pressure Calibration Workstation performs pressure calibrations on a wide range of dynamic pressure sensors. The Model K9907C is an integrated system that includes the Aronson pressure step actuator, data acquisition hardware, Windows PC, and software to automate test setup, data acquisition, data archiving, and report generation. The K9907C provides step pressure pulses up to 1000 psi (6.9 MPa) to the sensor under test. The K9907C calculates sensitivity, linearity, and discharge time constant.
High Pressure Calibration System
The K9913C Dynamic Pressure Calibration System offers accurate dynamic calibration of pressure sensors over a pressure range of 200 to 15,000 psi using a stable tourmaline reference sensor. A pressure impulse is simultaneously applied to both the reference and sensor under test (SUT) to determine the sensitivity of a pressure sensor at a particular amplitude. By varying the amplitude level, the linearity of the SUT can also be determined.
Ultra High Pressure Calibration System
The Model K9905D Pressure Calibration Workstation performs high pressure calibrations on a wide range of dynamic pressure sensors. The Model K9905D is an integrated system that includes the calibration fixture, data acquisition hardware, Windows PC, and software to automate test setup, data acquisition, data archiving, and report generation. The K9905D provides high pressure calibration up to 80,000 psi (550 MPa) to the sensor under test.
Series Gravimetric Calibration System
The 996x Series Gravimetric Calibration System provides for calibration of accelerometers, force sensors, and impact hammers over the low to mid frequency range. For measuring a single value sensitivity, accelerometers and load cells may be "drop" calibrated without a reference sensor, using Earth's gravity instead. Impact hammers are ratio calibrated using a known pendulous mass, a calibrated accelerometer, and Newton's Second Law.
Precision Acoustic Calibration Workstation
The Precision Acoustic Calibration Workstation Model 9350C is an accurate, turnkey, automated, PC-based system. The 9350C offers cost-effective calibration of 1/8", 1/4", 1/2" and 1" microphone cartridges (open-circuit sensitivity), microphone cartridges with preamplifiers (closed-circuit sensitivity) and microphone Frequency Response Function.